The CUT2000S was developed to process EPS, XPS and EPP insulation panels with a size of up to 1,250x1,050 mm and a maximum length of 1,250 mm.

The quality of the CUT2000S is predominantly defined by its extremely sturdy construction. We have purposefully made the decision not to go with the less robust Aluminum and instead opted for a much stronger painted steel construction. This prevents any torsion and twisting of the frame during production - even if the machine is working on a 100 kilogram Styrofoam block. The machine can be loaded from both long sides.

The CNC styrofoam cutting machine CUT2000S has 4 axes. They can be controlled in parallel or independently of one another.

Cut 3D objects with two differently sized contours such as cones, conical columns, profiles or airfoils from EPS and XPS sheets and small blocks. The cutting wire tension for parallel cuts is controlled by a hard spring and for 4-axis cuts with a wire length change of up to 150mm by a soft spring. And if 150mm is not enough, take a look at the CUT2500S. This can optionally even be equipped with an automatic wire tensioner for extremely twisted cuts.

A spiral spring controls the tension of the cutting wire. You will receive a harder and a softer spring. Use the harder spring for parallel cuts. For tappered cuts with a wire length change of up to 150 mm the softer type is recommended.

Thanks to the quick wire installation system, the wire can be removed and reinserted without tools. This makes monolithic cutting easier and faster.

The CUT2000S series is delivered with our self-developed 4-axis CNC control.

The control can be loaded with up to 3.0 amps per channel. In addition, the control can be expanded by a 5-channel, what the control of an additional axis, e.g. a rotary table permitted.

The cutting wire of the CUT2000S series will always have the correct temperature to guarantee clean cuts when processing Styrofoam, Styrodur or epp foams. The reason behind this is the sophisticated current control, which contains a microprocessor that controls the power supply particularly during 3D tappered cuts, as the wire lengths will vary during this process.

This way, we can guarantee that every cut will be clean and accurate

The package includes the machine software and either the Mach3 USB controller or the even more secure and reliable LAN controller for all current Windows versions. The software interface was optimized for wire cutting with 4 axes and tested extensively in practice. So you can be sure that everything works immediately.

All you need is a Windows computer or laptop with a free USB or LAN port and about 10 minutes for installation. It couldn't be easier.

Order your machine right away with a Windows PC optimized for CNC cutting. The package includes: Windows PC, TFT screen, Keyboard and mouse. The latest Windows operating system is installed and cnc optimized. The package is plug and play.

To create your 2D and 3D cutting data we recommend our self-developed styroCAM software. It is a cloud-based Styrofoam cutting software for calculating offer prices and creating cutting files for standard 2D and 3D cuts. You can find more information under Software .

With the optional extension arm, you can integrate a monitor, keyboard and mouse into the styrofoam cutting machine. You gain space that would otherwise be occupied by the control desk or work table. Even the power socket is integrated. All you have to do is assemble the console, plug in your machine and get started - It's that easy.