BLS 500S - 3D Series

Multiwire horizontal block cutter for cutting EPS and Neopor blocks.

These semi-automatic EPS Slicers can slice polystyrene blocks with up to 10 wires simultatiously.

The wires can be installed horizontally and/ or diagonally to cut plates, sloping boards, slope insulation from insulation boards.

These machines work without a computer

BLS500S

BLS 500S Plattenslicer
  • PRICE AT

    6.150,00 € + TAX

  • PRICING

Models

RTR
X-Achse (1)
Y-Achse (2)
Z-Achse (3)
Drähte
Preis zzgl.
BLS 515S 1.300 mm / 51” 1.300 mm / 51” 1.300 mm / 51”
5
6.150,00 € Inquiery
BLS 525S 2.100 mm / 82” 1.300 mm / 51” 1.300 mm / 51”
10
9.950,00 € Inquiery
BLS 535S 3.100 mm / 122” 1.300 mm / 51” 1.300 mm / 51”
10
11.950,00 € Inquiery
BLS 545S 4.100 mm / 161” 1.300 mm / 51” 1.300 mm / 51”
10
12.950,00 € Inquiery
BLS 555S 5.100 mm / 161” 1.300 mm / 51” 1.300 mm / 51”
10
14.950,00 € Inquiery

(1) Horizontal travel forward / back (2) Length of the cutting wire (Price) plus Tax and shipping

Basic Machine

EPS cutting machine for semi-automatic cutting of sheets and slope wedges from Styrofoam, Neopor, Styrodur, EPP and other foams.

The open machine table made from welded and painted steel profiles is extremely stable and can be loaded with a forklift from all sides.

The cutting wires are stretched by two hard spring each. These machine is suitable for processing blocks from Styrofoam and Neopor up to a Size of 5.000x1.250mm (X / Y) and a width of 1.250 mm (wire). The Wire can be installed horizontally and/ or diagonally in a grid of 2 mm.

 

BLS510S Sheet and Panel cutter BLS515S

Wire Extension

Increase productivity and cut with up to 20 wires simultatiously.

Application

  • Sheet cutting
  • Slope roofs
  • Insulation panels
  • Packaging, special packing
  • Craft and Industry

Specification

  • Runs automatic
  • Runs on single button
  • No computer needed
  • 10 cutting speeds
  • 10 cutting wires
  • Horizontal cutting
  • Ddiagonal cutting

Technical Data

Models Unit BLS 515S BLS 525S BLS 535S BLS 545S BLS 555S
X-Axis mm 1.300 2.100 3.100 4.100 5.100
Y-Axis mm 1.300 1.300 1.300 1.300 1.300
Wire length mm 1.300 1.300 1.300 1.300 1.300
Motors 1 1 1 1 1
Wire 5 10 10 10 10
Motor Nm 25 25 25 25 25
Drive Riemen Riemen Riemen Riemen Riemen
Speed mm/min 1.200 1.200 1.200 1.200 1.200
Power 220VAC/10A 220VAC/10A 220VAC/10A 220VAC/10A 220VAC/10A
Packaging
(LxWxH)
cm 160x160x100 260x160x100 360x160x100 460x160x100 560x160x100
Weigth kg 85 130 175 195 215

(Speed) 10 speed programs

Content of delivery

  • Machine fully assembled and tested
  • Variable machine table
  • Machine control with power supply 220/110VAC
  • Power supply for 10 cutting wires
  • Cutting wires, springs
  • Manuals, installation instructions
  • 2-year warranty

The assembling of the machine takes about 60 minutes.
To operate the machine no further accessories are required.

Optional Accessories

  • Wire extension to 20 wires
  • Wire
  • Springs

Delivery

  • About 8 weeks after receiving payment
  • Insured transportation via Schenker
  • Pickup available


Modells

CUT BLS510S modells