CNC controlled Fast wire cutting machines to cut 2D Contours out from materials that cannot be cut thermally. These include flexible foams (PE, PP and PUR), as well as mineral wool (glass wool, Fiberglas, rock wool and slag wool) and Styrofoam (EPS) and Styrodur (XPS).
Cold wire cutting machines works abrasive. Basically, its endless wire grates away the material. This wire is only one to two millimeters thick and rotates with a working speed of up to 300 km/h. Thats the reason, why extremely fine cuts and contours with high cutting speeds are possible.
With its extremely sturdy steel frame the FW 4113H Fastwire series targets the commercial production. The machine will cut 2D shapes, profiles, contours, pipe-isolation, panels and a lot more completely unattended. The fast FW 4113H will increae the production of furniture builders and upholsterers as well as manufacturers of Insulation and packaging up a notch.
The FW 4113H is a very powerful and high performance fast wire cutting machine for the commercial production. This machine will be fully tested, inspected and then packaged for delivery. The montage and start up can either be done by the customer themselves or optional by one of our technicians. The standard equipment contains the following components:
This new Fastwire technology has to be seen - preferably live and in action. So, why not schedule a visit with our team in our competence center in Ilmenau, Germany right now? You will be able to see for yourself just how advanced this development of our Fastwire cutting machine is and how your production could benefit from it. This applies especially to those, who have already worked with previous models of fast wire cutting machines. The smooth collaboration between our powerful hardware and high performance software really is a sight worth savoring. You won't want to leave once you are here.
Our experienced and fully trained staff will gladly answer all your questions and show you in a live presentation what this FW 4000H is capable of. Why not write to us or simply give us a call right now!
ContactFast wire cutting machines are true "carnivores". They cut flexible foams (PE, PP and PUR) as well as mineral wool (glass wool, Fiberglas, rock wool, slag wool), buta also just as easily Styrofoam (EPS) and Styrodur (XPS).
Here is an overview of its most important features:
The FW 4113H comes with a machine table made of welded and powder coated steel. The work top can be loaded comfortably from three sides manually. It will provide enough support for heavier materials and prevent them from slipping whilst being cut. We do recommend to clamp lighter materials or to fixate them with double-sided adhesive tape.
A high-quality 4.2kW IEC rotary asynchronous motor "made in Germy" is used to drive the wire. Low weight thanks to aluminium housings, constant speed and sufficient power reserves even at high speeds distinguish these special motors.
The matching frequency inverter with 7.5kW allows safe and low-wear operation
Choose the right wire for the material. We deliver ready to use endless wire with a diameter between 1 to 2 mm. As a rule of thumb: the thinner the wire, the finer the cut. The maximum usable wire length is around 1,250 mm.
Small blocks made of styrofoam or foam are well suited for cutting. Depending on the material, these standard blocks are 1.25 long, 1.25 m wide and up to 500mm high. Thanks to the optimised travel paths, the FW 4113H series can also be used to cut in one go.
You can cut off panels of various thickness manually or automatically. If the software controls the process, the machine even runs unattended.
The fully automatic plate cutting function of the FW 4113H allows the cutting of plates from entire blocks
The FW 4113H provides maintenance-free chain drive and rack-and-pinion drive for a long service life. As a result, large amounts of mineral wool, foam or PE, PP and PUR foams can be cut repeatedly accurately.
With our styroCAM software, you can generate the machine program quickly and easily from a drawing. No prior knowledge is required. styroCAM is "Software in the Cloud" and runs operating system independently on any Windows or MAC system. Each update is immediately available to you. Simply use the web-based program via a browser such as Internet Explorer, Firefox or Chrome. The software works with DWG, DXF, PLT files.
StyroCAM creates your finished 2D cutting data in a matter of seconds. These programs then reach the CNC machine via network or USB stick.
Every CNC machine requires sophisticated CAM software for fast and uncomplicated editing of cutting programs.
To do this, create drawings in CorelDraw® or AutoCAD or any other vector
program and export them as DXF, DWG or PLT drawings. These drawings are
then loaded into our styroCAM software and converted into a machine program
with just a few clicks, which can be subsequently cut.
Here's a selection of software that will help you get the start-finish
victory with the FW 4000H::
The strength of this CAD program is that drawings in vector format can created quick and easily. The DXF export enables immediate processing for further use.
Cloud based software (SaaS) to calculate numerical control data for standard 2D objects with and without entry and exit cuts.
The cloud based software creates the numerical control data for the automated cutting of panels and boards.
Would you agree that nowadays many design engineers develop their machines past its actually needed use? In our group of companies, we produce foam pieces from EPS, XPS and other materials on a daily basis, which is why cnc-multitool is able to offer actually practical hardware and software - literally from users for users.
Upholstery "Polsterei Schumann" (Upper management)