CNC Styrofoam cutting machine for computer-controlled cutting of 2D contours from Styrofoam, Styrodur, Neopor and other foams.
The machines of the CUT 4000S series are quality Made in Germany. The extremely stable open machine table made of welded and painted steel profiles enables the machine to be loaded quickly and easily from all sides. The machine has two axes and can cut with up to 10 wires. The cutting wire tension is controlled by two hard springs. These machines are suitable for processing Styrofoam and Neopor blocks up to a size of 5,000x1,250x1,050mm.
Optionally, all machines of the CUT 4000S series can be equipped with trolleys. This increases productivity and reduces the downtime when clearing the machine by up to 40%.
This is the ideal machine series for all industries that have to cut large quantities quickly and easily with up to 10 wires.
Roller shutter technology GeoPac (CEO)
With its stable steel frame, fast drives and uncomplicated operation, the CUT 4000S series impresses commercial and industrial users. It cuts 2D shapes, profiles, pipe sections, plates and much more This is how the CUT 4000S brings the production of roller shutter boxe producers just as busy as the manufacturers of stucco moldings and profiles.
The CUT 4000S machines are quality "Made in Germany". Each machine is hand-assembled, adjusted and extensively tested befor delivery to ensure that all machines will run smoothly for a long time.
The CUT 4000S was developed to process EPS standard blocks with a size of 1,250x1,050 mm and a length of up to 5 m quick and uncomplecated. In contrast to the machines of the CUT 5000S series, it is not the block but the cutting portal that is moved. This enables high performance with less space requirements.
The extremely stable open machine table made of welded and painted steel profiles enables the machine to be loaded quickly and easily from all sides. So larger styrofoam blocks can be loaded either with a fork lift or with the trolley loading option
With the CUT 4000S, two spiral springs control the tension of the cutting wire. The springs ensure that the wire does not sag when it is cuts and that it always has the optimal tension. So you can be sure that you always have a precise and clean cutting result.
Thanks to the springs, the wire can be quickly removed and reinserted without tools. Above all, this makes it easier and faster to change wires and to set the wire spacing.
The wire spacing is set using a scale on both sides of the threaded rods. This is the quickest way to set the wires and will not only save you time but also allows you to cut more.
The cutting wire of the CUT 4000S series will always have the correct temperature to guarantee clean cuts when processing Styrofoam, Styrodur or Neopor foams. The reason behind this is the sophisticated current control, which contains a microprocessor that controls the power supply particularly during 3D cuts.
This way, we can guarantee that every cut will be clean and accurate.
The CUT4000S series is delivered with our self-developed 4-axis CNC control.
The control can be loaded with up to 8.0 amps per channel. In addition, the control can be expanded by a 3rd channel, what the control of an additional axis, e.g. a second Y-axis.
Our machines are complete, everything is included, even the machine software and the even more secure and reliable LAN controller for all current Windows versions. The screen of the software was designed and optimized for wire cutting with 4 and 5 axes and extensively tested in practice. You can be sure that everything will work immediately.
All you need is a Windows computer or laptop with one Free LAN connection and about 10 minutes to install everything. It couldn't be easier.
The machines of the CUT 4000S series can be upgraded by the following accessories. This makes the machines plug and play and you can be sure that your machine will work reliable with the required performance.
While the styrofoam cutting machine is still working, load the trolley with the next polystyrene block. You then roll the car up to the machine and dock it there. Slide the block onto the machine table and fix it using a snap-in system. Depending on the machine type, several transport trolleys can also be used. After cutting, slide the block back onto the trolleys. Away from the machine, the cutted parts can then be removed from the block and packed away. Unproductive machine downtimes are reduced to a minimum and are a thing of the past.
The CUT 4000S can be expanded by two independent Y-axes. This allows you to cut e.g. slop panels, valley and ridge boards as well as roof turrets to be cut from one piece. The programming can be done with the help of our software styroCAM via parameter input. The annoying creation of drawings is no longer necessary.
Expand the CUT 4000S styrofoam cutting machines with the option of rotating cutting arms. The cutting arms can be freely rotated by 90 °. This enables horizontal and vertical contour and sheet cuts with up to 10 wires. It is thus possible to process standard blocks from above and from the front with one machine.
Order your machine right away with a Windows PC optimized for CNC cutting. The package includes: Windows PC, TFT screen, Keyboard and mouse. The latest Windows operating system is installed and cnc optimized. The package is plug and play.
Expand the machine with a barcode scanner. The barcode add-on module makes operation child's play. Load the order-related cutting file directly into the machine software using the scanner. This avoids errors and production is even faster.
To create your 2D and 3D cutting data we recommend our self-developed styroCAM software. It is a cloud-based Styrofoam cutting software for calculating offer prices and creating cutting files for standard 2D and 3D cuts. You can find more information under Software .
The CUT 4000S is your entry into the production classof styrofoam cutting machines. Simply remove the packaging, set it up, plug it in and start - that's how easy it is. The shipment contains everything you need to get started:
At first glance, most hot wire cutting machines all seem very similar. The difference becomes apparent in the normal day to day production in terms of saving time and money. Particularly important is the easy-to-use, powerful software. Herein lies one of the outstanding strengths of cnc-multitool. You will hardly find anything comparable in the market.
Even the best hardware is pretty much useless, if the software is the
limiting factor. In order to fully exploit the potential of the CUT 4000S,
we recommend to you the following software:
With this drawing software you can create easily and fast letters, logos, lettering and more in the vector format. Enables direct export for further processing.
The strong point of this CAD program is the simplicity, how quickly the user can create drawings in vector format. The subsequent DXF export can be processed further immediately.
Cloud-based Styrofoam cutting software for calculating offer prices and creating the cutting files for standard 2D and 3D cuts.
In addition to many advantages, the design of the CUT4000S machine has also their limits. A cut with a longer wire is unfortunately not within the realm of the 4000S series. For such cases we have developed the CUT 3500SV series, which, thanks to its 4 axes, can also do tappered cuts as cones, conical profiles and much more with one wire. It is worth taking a look at the sisters of the CUT 4000S...
Is this Styrofoam cutting machine right for you? We are happy to help and advise you about all the pros and cons in a phone call. As we are processing polystyrenes ourselves on a daily basis, we are confident that we can answer all your questions from our very own experience - from users for users.
See for yourself just how powerful our hot wire cutting machines really are. Send us a quick message and let us know how we can help. Or simply give us a call right now.CONTACT