CT5000S - semi-automatic multi-wire cutter slicer dicer

CT 5000s
Gate cutter
with 60 wires
horizontal & vertical

to process styrofoam and neopor blocks

28.500,00 €

SOFTWARE


CT5000S

DOCUMENTS


SHARE

PRICES from


EPS cutting machine CT 5000s::
Slicer dicer cutting machine


The CT 5000S owes its high cutting performance to the up to 60 cutting wires.

For example, 40 wires can be clamped horizontally and 20 wires vertically at the same time to quickly and easily cut small and large EPS blocks not only into sheets but also immediately into finished packaging inserts. On one side of the machine, the polystyrene is placed and than moved through the wires via the roller belts. On the other side, the finished blanks can be taken off and immediately packed. The machine is best operated by two people.

We recommend this machine to companies with very large batch sizes.

CT 5000s - slope boards and isolation board production
CT 5000s - slope boards and isolation board production

Produkt-Highlights

  • Qualität »Made in Germany«
  • Intelligent: Semi-automatic machine
  • Well thought: ideal for quick panel cuts
  • Versatile: EPS, XPS and EPP sheets and large blocks
  • Stable: Welded and painted steel construction - no Alu!
  • Sandwich cut: Cutting several Styrodur or Styrofoam sheets in one step
  • Sturdy: Welded and powder coated steel construction - no Aluminum!

Sevice-Highlights

  • Shipping: around 8 weeks
  • Ready to use: Comes fully tested and preassembled
  • Fast: Inside Germany the technician will come within 48 hours.
  • Modular: Machine components are easily exchanged by the operator.
  • Training: By our experienced and well-trained staff
  • Advice: We will support our customers from the initial contact up to the final solution.

Extensions

  • ctting wire
  • springs

»We now cut the EPS packaging inserts for our furniture ourselves. We are 100% satisfied.«

Furniture factory Fromm (Head of production)


CT 5000s - Features


The CT 5000s stands for quality made in Germany. Each machine is assembled, adjusted and extensively tested by us by hand. This is the only way we can be sure that all machines work reliable and deliver the required performance for a long time.

Basic equipment

CT 5000s Series - sheet cutting machine

The machines of the CT 5000S series are used as automatic EPS gate cutting machines. Cut polystyrene blocks or Neopor blocks into packaging inserts with up to 60 wires simultaneously. The wires can be inserted horizontally for cutting panels or diagonally for cutting sloped panels and sloped insulation. In addition, wires can also be hooked vertically to create a cutting grid of horizontal and vertical wires.

The extremely stable open machine table made of welded and painted steel profiles enables quick and easy loading of the machine from all sides. This means that larger styrofoam blocks up to a size of 1,250x1,250x2,000 mm can be lifted on the machine.

Quick Wire system

CT 5000s Series - sheet cutting machine

Two spiral springs on both sides of the wire control the tension of the cutting wire. The two springs ensure that the wire does not sag during the cutting and that you get precise and clean cutting result again and again. Thanks to the quick wire system, the wire can be removed and reinserted without tools. Above all, this makes changing wires easier and faster.

Automatic Power supply

CT 5000s Series - automatic power supply

The cutting wire of the CT 5000s series will always have the correct temperature to guarantee clean cuts when processing Styrofoam, Styrodur or epp foams. The reason behind this is the sophisticated current control, which contains a microprocessor that controls the power supply particularly during 3D cuts. This way, we can guarantee that every cut will be clean and accurate.

Microcontroller control

CT 5000s Series - conveyor belt control

The drive motors of the two roller conveyors of the CT 5000S are controlled and regulated with controlled and regulated by high-quality frequency converters.

Optional accessories


The CT 5000S can be upgraded by the following accessories. This makes the machines plug and play and you can be sure that your machine will work reliable with the required performance.

Side walls

CT 5000S Seitenwände

With the optional side walls, panels can now be placed vertically in the the machine and processed. They are supported by the side walls and no longer fall over.

Quick-change frame

CT 5000S Scnellwechselrahmen

Add interchangeable frames to the CT 5000S. These interchangeable frames have suspension plates with fixed wire distances. The use of several different frames can reduce the time for changing the wire spacing significantly.

Technical specifications


Modell
CT 5000s
 
Working length(X)
2.000 mm
 
Working height (Z)
1.250 mm
 
Working width (wire)
1.250 mm
 
Table height
750 mm
 
Number of wires
60
 
Drive
Conveyor belt
 
Traveling speed. max.
2m/min
 
Switch wire on / off
manual
 
Power connection
380VAC, 50-60Hz
 
Power consumption
15 kW
 
Installation dimensions (LxWxH)
600x200x200 cm
 
Weight
580 kg
 

Content of delivery


The CT 5000s is our production class of EPS cutting machines. Unpack, set up, connect electronics and get started - it's that easy. The delivery includes everything you need need:

Maschine Plug&Play
Maschine Plug&Play
Machine control
Machine control
power supply
Power supply
cutting wire
Cutting wire

Maschine

  • Machine fully assembled and tested
  • Machine control
  • Power supply wire
  • Operating manual, assembly instructions
  • 1 year guarantee

Required accessories

  • Curring wire
  • springs

Optional accessories

  • work console

Models in comparison


In addition to many advantages, the design of the CT 5000s also has its limits. For such cases we have developed the Series CT5000S , which not only cuts blocks horizontal but also vertical with up to 60 wires. It's well worth taking a look at this bigger sister of the CT 5000s.

BLS 500S  EPS-Plattenschneidemaschine CT 2500S  EPS-Plattenschneidemaschine CT 5000S EPS-Gatterschneiddemaschine
Serie
BLS 500S
CT 2500S
CT 5000S
Travel length (X)
up to 4.000 mm
2.000 mm
up to 5.000 mm
Travel width (Y)
1.250 mm
1.250 mm
1.250 mm
Travel height (Z)
1.250 mm
1.250 mm
1.250 mm
Number of wires
10
20
60
 

* Prices start from plus VAT

Live - Demonstration


Free technical assistance

The CT 5000ss machines have to be seen - preferably live and in action. So, why not schedule a visit with our team in our competence center in Ilmenau, Germany right now? You will be able to see for yourself just how advanced this development of our Milling machine is and how your production could benefit from it. This applies especially to those, who have already worked with previous models of fast wire cutting machines. The smooth collaboration between our powerful hardware and high performance software really is a sight worth savoring. You won't want to leave once you are here.

Our experienced and fully trained staff will gladly answer all your questions and show you in a live presentation what this CT 5000s is capable of. Why not write to us or simply give us a call right now!

Contact