Practical Knowledge

Which CNC Hot Wire Cutting Machine Suits My Production?


The right machine is not the biggest - it is the one that optimally matches the actual production.

First Understand Production - Then Select Machine


The most common mistake when buying a machine: buy a machine first and then think about production. This almost always leads to wrong purchases. The right sequence: first understand what is to be produced, which materials, quantities and workflows are planned - then select the right machine.

These Questions Must Be Answered


  • What is to be produced? - describe the product and application
  • Which material? - EPS, XPS, Neopor, EPP
  • Which block size / which format?
  • Which wire length is needed? - ask separately, do not derive from block size
  • 2D only or also 3D / conical geometries?
  • Quantities and production target?

The Decision Path


Step 1: 4-axis or 2-axis? If conical geometries, wings or rotational bodies are planned: 4-axis single-wire machine. If only prismatic 2D geometries: continue to step 2. Step 2: single-wire or multi-wire? Small to medium quantities, flexible production: single-wire. High quantities, series production, identical contours: multi-wire. Step 3: the desired wire length determines the specific model within the series.

Quick Overview of Machine Recommendations


  • Entry, compact, 4-axis → CUT1600S
  • 4-axis, EPS standard block → CUT2000S
  • 4-axis, wire up to 2500 mm → CUT2500S
  • 4-axis, large, rotation planned → CUT3000S
  • 4-axis, wire over 3 m or variable → CUT3500SV
  • 2-axis, multi-wire up to 10 wires → CUT4000S
  • 2-axis, multi-wire up to 20 wires, Neopor → CUT5000S

Frequently Asked Questions


The key questions and answers on this topic.

Show questions

How do I find the right hot wire machine?

First analyse the production: what is produced, which material, which block size, which wire length, 2D or 4-axis, which quantities. Then select the right machine based on these answers.

Why should I not simply buy the largest machine?

Large machines with long wire lengths produce worse quality than smaller ones with shorter wires. They are also more expensive, harder to operate and more difficult to maintain. The best machine is the right one - not the largest.

What happens if I buy the wrong machine?

Wrong purchases when buying a machine are common and expensive. The machine does not suit the production, the quality is worse than expected or the flexibility is missing. That is why cnc-multitool always recommends analysing the production first.

Personal Machine Consulting


We analyse your production and recommend the machine that really suits - not the largest.

Request advice

Related Knowledge


Related articles from our practical knowledge on this topic.