SHD2000S
Shred large offcuts quickly and cleanly
Quickly reduce bulky EPS, Neopor, XPS and EPP offcuts to a manageable size and collect them directly in the collection bag.
Shred offcuts quickly and cleanly
When processing large Styrofoam blocks, large and bulky offcuts often arise that cannot be reused – for example when producing letters, moulds or other large cut parts.
In many workshops these offcuts are reduced with an electric chainsaw or cut up on a CNC hot wire cutting machine. Afterwards the pieces have to be collected, put into bags and the work area tidied up again.
The SHD2000S takes over this job as a separate shredder. Offcuts are simply fed in from above, shredded by two cutting levels and collected directly in the collection bag fixed underneath.
This reduces labour time, machine time and unnecessary costs, while the actual cutting machine remains available for production.
How does the SHD2000S work?
Large offcuts are fed in from above into the 1,000 × 1,000 mm feed opening and fall by their own weight through two cutting levels, each with 20 heated cutting wires (40 in total) – so the material is shredded in two directions one after the other.
The spacing of the cutting wires can be adjusted individually and determines the piece size: at a spacing of about 50 mm, pieces of roughly 50 × 50 mm are produced. The shredded material falls directly into the collection bag fixed underneath.
Suitable for EPS, Neopor, XPS and EPP as well as other foams that can be cut thermally with a hot wire. Thanks to its castors, the SHD2000S can be used flexibly wherever offcuts occur.
Technical data
| Model | SHD2000S |
|---|---|
| Feed opening | 1,000 × 1,000 mm |
| Cutting levels | 2 |
| Cutting wires | 20 per cutting level, 40 in total |
| Wire spacing | individually adjustable |
| Typical grid | approx. 50 × 50 mm at 50 mm wire spacing |
| Cutting wire diameter | 0.5 mm |
| Wire temperature | adjustable |
| Power consumption | approx. 3,600 W |
| Power supply | 110–230 VAC, 50–60 Hz |
| Machine dimensions (L × W × H) | approx. 1,300 × 1,300 × 2,000 mm |
| Weight | approx. 60 kg |
| Technical data sheet | |
| Price excl. VAT | 4.650,00 € |
| Request |
Scope of delivery
The SHD2000S is prepared and function-tested at the factory. To keep packaging size and shipping costs as low as possible, the machine is delivered pre-assembled and finished on site at the customer.
Included:
- SHD2000S hot-wire shredder
- 2 power supplies, one per cutting level
- Holder for collection and recycling bags
- Castors
- Cutting wire, springs
- Operating manual
- 12 months warranty
Options and accessories
Additional cutting wires
For special applications the number of cutting wires can be adapted. For higher power demand, correspondingly rated power supplies are used.
Installation and operation
Easy final assembly at the customer
The SHD2000S is delivered pre-assembled. To keep packaging size and shipping costs as low as possible, the final assembly is done at the customer.
The machine is then connected electrically, the desired wire arrangement is set and the collection bag is fitted.
Thanks to the castors, the SHD2000S can be used flexibly at different locations after assembly.
Frequently asked questions
Which materials can be shredded with the SHD2000S?
The SHD2000S is suitable for EPS, Neopor, XPS, EPP and other foams that can be cut thermally with a hot wire.
How does the SHD2000S work?
Large offcuts are fed into the machine from above and fall by their own weight through two cutting levels with 20 heated cutting wires each. The shredded material then falls directly into the collection bag fixed under the machine.
What piece size does the SHD2000S produce?
The spacing of the cutting wires can be adjusted individually. At a wire spacing of about 50 mm, pieces of roughly 50 × 50 mm are produced. The actual piece size also depends on the shape and position of the remaining material.
Can the SHD2000S be used mobile?
Yes. The SHD2000S stands on castors and can be used flexibly at the cutting machine, in the warehouse or at other locations where offcuts occur or are collected.
How is the SHD2000S delivered?
The SHD2000S is delivered pre-assembled. The final assembly is done at the customer so that packaging size and shipping costs can be kept as low as possible.
Are the collection bags consumables?
Yes. The collection bags used under the machine are consumables and can be reordered as needed.
Experience the SHD2000S live
Visit us for a demonstration of the SHD2000S in Ilmenau. We will be happy to show you how quickly even large and bulky production offcuts are reduced to a manageable size.
Request a demonstrationOther interesting products and accessories
Complement your SHD2000S with matching machines and accessories for processing and handling insulation materials.
Consulting
personal and
professiona
Testing
Experience our
machines live
Planning
Customized solutions
for your production.
Support
there for you even
after your purchase